• Description

ISL90727WIE627Z-TK Digital Potentiometer 10k Ohm 1 Circuit 128 Taps SC-70-6

The Intersil ISL90727 and ISL90728 are digitally controlled potentiometers (XDCP™). Each device consists of a resistor array, wiper switches, and a control section. The wiper position is controlled by an I2C Bus™.
The potentiometer is implemented by a resistor array composed of 127 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the SDA and SCL inputs.

Features
• Volatile Solid-State Potentiometer
• I2C Serial Bus Interface
• DCP Terminal Voltage, 2.7V to 5.5V
• Low Tempco
- Rheostat - 45 ppm/°C Typical
- Divider - 15 ppm/°C Typical
• 128 Wiper Tap Points
- Wiper Resistance 70Ω Typ at VCC = 3.3V
• Low Power CMOS
- Active Current, 200µA Max
- Standby Current, 500nA Max
• Available RTOTAL Values = 50kΩ,10kΩ
• Power-on Preset to Midscale
• Packaging
- 6 Ld SC-70
• Pb-Free (RoHS Compliant)

Applications
• Mechanical Potentiometer Replacement
• Transducer Adjustment of Pressure, Temperature, Position, Chemical, and Optical Sensors
• RF Amplifier Biasing
• LCD Brightness and Contrast Adjustment
• Gain Control and Offset Adjustment

specification of  ISL90727WIE627Z-TK

Category

Integrated Circuits (ICs)
Data Acquisition
Digital Potentiometers

Mfr

Renesas Electronics America Inc

Series

XDCP™

Product Status

Active

Taper

Linear

Configuration

Rheostat

Number of Circuits

1

Number of Taps

128

Resistance (Ohms)

10k

Interface

I²C

Memory Type

Volatile

Voltage - Supply

2.7V ~ 5.5V

Features

-

Tolerance

±20%

Temperature Coefficient (Typ)

±45ppm/°C

Mounting Type

Surface Mount

Supplier Device Package

SC-70-6

Package / Case

6-TSSOP, SC-88, SOT-363

Operating Temperature

-40°C ~ 85°C

Resistance - Wiper (Ohms) (Typ)

85

 

 

Go To Top